A small hobby servo for pan, tilt, and lift mechanisms. Metal gears hold up better than the nylon gears in an SG90 when a mechanism is back-driven or stalls.
Specifications
- Rotation: about 180°
- Stall torque: about 1.8 kg·cm at 4.8 V, 2.2 kg·cm at 6 V
- Speed: about 0.1 s/60° at 4.8 V
- Supply: 4.8–6 V
- Control: PWM, 50 Hz, about 0.5–2.5 ms pulse
- Lead: 3-wire: brown GND, red V+, orange signal; 2.54 mm female plug
- Size and weight: about 22.8 × 12.2 × 28.5 mm, 13.4 g
- Pack: 4 servos with horns and screws
Typical uses
- Pan and tilt heads for sensors and cameras
- Lift and turn mechanisms in desk gadgets and robots
- Small robot arms and RC models
Power servos from a separate 5 V supply rather than a microcontroller 3.3 V pin, and share ground with the controller.
Ordering notes
- Ships within 5 business days after payment.
- Shipping: USD 15 per order worldwide, free from a USD 79 merchandise subtotal. See Shipping.
- Need a larger quantity, a different version, or a custom carrier board? Request a quote.
