SFLY SP10A SPI flash programmer with SOIC8 test clip, SOP socket adapters, 1.8 V adapter and DIP adapter boards

SFLY SP10A SPI Flash Programmer Kit with SOIC8 Clip, 1.8 V Adapter and SOP Sockets

$69.00

SFLY SP10A USB programmer for 25-series SPI flash and serial EEPROM, with an SOIC8 test clip for in-circuit programming, four SOP socket adapters, a 1.8 V adapter and DIP adapter boards. Type-C, Windows software.

Request a Quote
30-day returns · 90-day warranty · Duties included
✓Returns: 30-day RMA for unused, sealed catalog hardware. Address is issued after approval. See Returns.
✓Warranty: 90-day limited warranty on paid Kymopsis-branded catalog hardware for manufacturing defects. Custom work follows the quote.
✓Ordering & shipping: Duties and import taxes included: we ship duties paid, so there is nothing extra to pay at delivery. Secure checkout through Stripe. Orders ship worldwide at USD 15, free from a USD 79 merchandise subtotal. Dispatch time is stated on each listing; the carrier is shown at checkout. Policies.
SKU: KYM-DT-SP10A Category:

A compact USB programmer for 25-series SPI NOR flash and serial EEPROM, sold as a ready-to-use kit: the SFLY (Sofi) SP10A with an SOIC8 test clip for in-circuit programming, SOP socket adapters, and a 1.8 V adapter. It is the tool we recommend for loading a different firmware build onto Kymopsis radar boards whose flash chip can take a clip.

Specifications

  • Model: SFLY SP10A (successor to the SP8 series)
  • Supported devices: 25-series SPI NOR flash (auto-identified), I2C and Microwire serial EEPROM; up to 256 Mbit
  • Socket: 28-pin zero-insertion-force socket
  • Supply to the chip: programmable 3.3–5.0 V; 1.8 V chips through the included 1.8 V adapter
  • Protection: short-circuit and overcurrent protection, plus a poor-contact pin check
  • Interface: USB Type-C, powered from USB
  • Software: the maker’s FlyPRO II for Windows 7, 8, 10 and 11
  • Size: 108 × 76 × 21 mm

What is in the kit

  • SP10A programmer
  • SOIC8 test clip with ribbon cable and adapter board, for programming an 8-pin flash chip in circuit without desoldering it
  • Four SOP socket adapters: 150 mil SOP8/16, 25-series SOP16, 200–209 mil SOP8, and SOP16 wide
  • 1.8 V adapter, SOP8–16 to DIP16 board and SOP8 to DIP8 board

The SP10A is the single-unit model. The SP10B and SP10F add multi-unit and offline production modes, which you only need for production lines; ask through B2B if you need them.

Software, manual and support

Using it with Kymopsis radar boards

  • On radar boards with an 8-pin SOP flash chip, clip the flash, select the chip in FlyPRO II, and write the bin file from your development kit. Follow the flashing guide that comes with the kit.
  • The narrow 60 GHz AiP gesture board has a flash chip too small for a clip; it is reflashed over SWD instead.

Ordering notes

  • Ships within 5 business days after payment. See Shipping.
  • Need several units for a production line? Request a quote.

Reviews

There are no reviews yet.

Be the first to review “SFLY SP10A SPI Flash Programmer Kit with SOIC8 Clip, 1.8 V Adapter and SOP Sockets”

Your email address will not be published. Required fields are marked *

Kymopsis — RF & mmWave components, radar kits, and engineering services.
Operated by ValueOpus LLC (Wyoming, USA). [email protected]
Contact • Policies • Terms • Privacy • Shipping • Returns • Withdraw from contract • Billing • FAQ • Track order
© 2026 ValueOpus LLC. Regulatory Notice: Radio evaluation hardware is for engineering and laboratory use. It is not a certified consumer radio unless a specific SKU record says so. 47 CFR § 2.803 evaluation-kit treatment is not automatic. See Terms.